相关文章

丁基胶打胶机黑胶没压力的原因

来源网址:http://www.jjyxdy.com/

丁基胶打胶机黑胶没压力的原因

丁基胶打胶机是专门对胶粘剂等涂料进行控制并点滴、涂覆于产品表面的自动化设备.它是通过压缩空气将涂料送进供胶管,然后通过程序控制,将涂料按照预先设定的路径进行点滴或者涂覆.下面就让我们一起来看一下丁基胶打胶机黑胶没压力的原因有哪些吧.

Butyl rubber glue machine is specialized for adhesive coating for control and bit by bit, coated on the surface of the product automation equipment. It is through the compressed air will paint feed supply pipes, and then through the process control, coating according to a preset path for intravenous drip or coated. Next let us look together butyl rubber play black glue machine glue no pressure what it.

1, check the rubber glue to glue the air source is between 0.6 to 0.8Mpa;

2, 检查丁基胶打胶机触摸屏中编辑功能菜单中的密封不使用是否打开;

2, check the rubber glue machine touch screen edit function menu in the seal is not open;

丁基胶打胶机

Butyl rubber adhesive

3, 检查气动开关是否阻塞;

3, check the pneumatic switch is blocked;

4, 检查黑胶气动开关与电磁阀动作是否正常;

4, check the black rubber pneumatic switch and solenoid valve action is normal;

5, 检查丁基胶打胶机比例泵上的智能压力表是否报警,范围在7-35Mpa;

5, check the rubber plastic rubber machine proportional pump on the intelligent pressure gauge whether the alarm, range in 7-35Mpa;

6, check the hydraulic pressure, if there is no pressure, such as: no pressure: 1. Cleaning proportional overflow valve 2) check the proportion controller is power or loose;

7, 清洗丁基胶打胶机时是否能出白胶,如不出再检查313胶管、旋转接头是否阻塞;

7, whether can glue cleaning butyl rubber glue machine, such as a check, whether the 313 hose rotary joint;

8, 检查一组比例泵下限传感器IB233是否有信号,检查二组比例泵 IB407是否有信号;

8, check the lower limit of a set of pump sensor IB233 whether there is a signal, check whether the proportion of two sets of pumps IB407 signal;

9, 手动检查扫描仪数值是否有正常.

9, manual check the scanner value is normal.

以上就是关于丁基胶打胶机的信息了,希望简单的介绍,能够为广大用户带去更多关于丁基胶打胶机的知识,内容不断,精彩不断,更多内容下次继续介绍,希望大家继续阅读!

Above is about called the butyl rubber adhesive machine information, in the hope that simple introduction, able to provide customers with more about butyl rubber adhesive machine knowledge content constantly, constantly exciting, more next time continue to introduce, hope you continue to read!